MageLink - IPX File Transfer v1.17beta
Copyright (C) 1996 SSV Services
Written by Nathan Hartwell

----------
Disclaimer:
----------

  This program is provided AS IS.  I will take no responsibility for any
performance drop, data loss, and/or any other effects this program may incurr
upon your system.  You have the right to delete this program as you see fit.

------------
Registration:
------------

  None is required (yet).  However, donations may be sent to:

 Nathan Hartwell (aka mage@cdc.net)
 15 W. Meadowbrook Drive Apt #2
 Red Bank, TN  37415-2762

-------
Purpose:
-------

  This program was written to transfer files from one system to as many as 16
other systems.  Transfer rates vary depending on the drive performance of
each individual system involved (and on the number of systems in use).

NOTE: MageLink/2 (the OS/2 port, if it is done) will be done by Madison
      Hunter.  Hopefully he will add any necessary document changes.

-------------------------
MAGELINK.EXE Command Line:
-------------------------

  Use '/' or '-' as the switch prefix.  Valid switches are as follows:

      C - Specifies Client Mode
          (default if no command-line parameters are specified)

      H - Specifies Host Mode
          (default if only paths or filemasks passed on command-line)

     P# - Specify an alternate IPX socket to use (default: 0x4070)

      Q - Quiet mode (-no- display)

      R - Recurse Sub-Dirs (also sets host mode)

      S - Skip files that you already have, default is to overwrite.
          NOTE: Using this parameter automatically sets client mode.

  In Host mode you will also specify the source filemask.  The filemask may
contain a path (ie. *.* or F:\MODS\*.MOD will work).  Multiple files and/or
filemasks may be specified on the command-line.

  In Client mode, you can specify a destination path for incoming files.  If
no path is given, the current directory is used.